q8_pre-installazione_ 0860_IKW
##########################################################################
                 IMOLA 0860 IKW - Vdsl/VLAN
##########################################################################
 
IP Network Q8 : [IP_NET_Q8]/28 '(pari)' Ottenere IP LAN & SECONDARY chiamando 06/51818108
IP ROUTER Q8  : [IP_Router_Q8]= [IP_NET_Q8] + 1 '(dispari )' Ottenere facendo IP LAN+1
IP PUNTO PUNTO: [IP_PTP] '(dispari)' Ottenere da ordinativo WR 
IP GW         : [IP_GW] =  [IP_PTP] - 1 '(pari )'
NETMASK WAN   : [NETMASK] '(255.255.255.254 - 31)'

restore factory
set eth0 ipaddr [IP_Router_Q8] netmask 255.255.255.240 
set alias eth0 ipaddr 10.10.113.1 netmask 255.255.255.252 
set dsl line-mode multimode
set dsl on
set vlan add vid 835 interface vdsl0
set vlan vdsl0.835 ipaddr [IP_PTP] netmask [NETMASK] 
set bgp local-as 65201
set bgp network [IP_NET_Q8]/28
Set bgp neighbor [IP_GW] remote-as 3269 
set bgp neighbor [IP_GW] version 4
set bgp neighbor [IP_GW] advertisement-interval 5 
set bgp neighbor [IP_GW] route-map to_MPLS out
set bgp ip prefix-list LOCAL_NET seq 2 permit [IP_NET_Q8]/28
set bgp route-map to_MPLS permit 10 match ip address prefix-list LOCAL_NET 
set bgp on
save 
reboot

A) Al riavvio provare a ping-are l'IP 10.30.3.2 
   A.1) se risponde al ping chiamare Tiesse
   A.2) se non risponde al ping contattare Telecom

user: root
pass: tiesseadm
eth0: 10.10.113.1
eth1: 172.151.113.1
ttyS0: cavo cisco (9600,8,nessuno,1)(Bitsporsec,Databits,Parity,Stopbit)

CHIAMARE ITALO X OTTENERE IP,IPLAN PRIMARIO,IPLAN SECONDARY 0651818222
CHIAMARE CARMINE RITOTA X CONFIGURARE IMOLA 3664203880